One Control Granith Grey Booster OC-GGBn - NEW!
One Control Granith Grey Booster OC-GGBn
Pure and High Quality Boost!!!
Electric Guitar Effects Pedal designed by Bjorn Juhl BJF / BJFe
A clean booster is simply a pedal that amplifies signals. The concept is simple, however due to the various uses for this type of pedal, it is a complicated feat. The Granith Grey Booster allows a high-quality boost of up to +15dB with minimized switching noise due to BJF engineered circuitry. This booster is able to attain the equivalent S/N ratio of a high-end amplifier. In order for this to happen, the circuitry was created to fit the frequency range of an electric guitar, which lowers some overtones that could otherwise be present with other boosters. The case is made of high quality cut-out aluminum to protect the precious sound signals from inside and outside noises. It is also much more durable than die cast cases.
The frequency characteristic of the Granith Grey Booster is unique. If you turn up the output without changing the frequency characteristic of incoming signals, you won’t be able to ignore the unnatural 'feeling' it creates. This discomfort is caused due to the difference between the frequency characteristic at the original output level and the actual output level. The Granith Grey Booster creates the necessary frequency characteristics while the signal passes through the circuit. By doing so, the Granith Grey Booster realizes a pure and high quality boost sound without compressing the sound or narrowing the dynamic range. The One Control Granith Grey Booster secured the 500kΩ input impedance to support any guitar and bass. You can use it by directly connecting any guitars and basses. The One Control Granith Grey Booster can be used with any guitar amp. It not only pushes tube amps but it is also suitable for boosting drive channels inside transistor amps. It can also be used just like other amps for analog circuits even when used with a number of digital amps. The Granith Grey Booster will maximize the potential of any amp to awaken its true capability.
Uses For A Clean Booster
- Gain Booster
- Use it to boost your gain before or after any effect. If you connect a spatial effect after the booster, the input is amplified and sometimes creates its own unique effect.
- Master Volume
- If you connect the booster at the end of your signal chain on your pedal board, you can adjust the volume while maintaining the signal created by other effects. You can adjust the booster according to your playing style or role, like switching between the backing and lead.
- Gain Control for a Tube Amp
- If you connect a clean booster before the tube amp input to adjust the volume boost setting, you can increase the strength of the natural distortion. On the other hand, if you distort the amp first and set the clean booster to lower the volume when it’s turned on, you can decrease the gain on the amp when it’s turned on.
- Volume Control for Tube Amps
- If you set a clean booster in the amp’s effect loop, you can adjust the output level of the signal sent to the power amp while preserving the preamp distortion. Set it to increase the volume and you will be able to give your signal a power amp distortion along with a higher volume. Set it to a lower volume and you can use it like an attenuator.
Specifications for the One Control Granith Grey Booster OC-GGBn
- Input impedance: 500K
- Output impedance: 2K
- Maximum gain:+ 15dB
- Drive voltage: 8.8V~9.6V
- Current consumption: 1mA
- S/N ratio: 115dB
- Total harmonic distortion rate: 0.006% (1 kHz)
- True-Bypass Switching
- High Quality Aluminum Enclosure
- Power: 9V Battery or Standard DC Power Supply
- Size: 47Wx100Dx48H mm (Including Knobs)
- Weight: Approx. 140 grams
Make'n Music is proud to be an authorized dealer, as well as the USA Shipping Warehouse for One Control products. Best Selection always in stock and for sale at a great price.
SKU: | 818996013498 |
Serial Number: | 818996013498 |
MPN: | 818996013498 |
One Control Granith Grey Booster OC-GGBn
Pure and High Quality Boost!!!
Electric Guitar Effects Pedal designed by Bjorn Juhl BJF / BJFe
A clean booster is simply a pedal that amplifies signals. The concept is simple, however due to the various uses for this type of pedal, it is a complicated feat. The Granith Grey Booster allows a high-quality boost of up to +15dB with minimized switching noise due to BJF engineered circuitry. This booster is able to attain the equivalent S/N ratio of a high-end amplifier. In order for this to happen, the circuitry was created to fit the frequency range of an electric guitar, which lowers some overtones that could otherwise be present with other boosters. The case is made of high quality cut-out aluminum to protect the precious sound signals from inside and outside noises. It is also much more durable than die cast cases.
The frequency characteristic of the Granith Grey Booster is unique. If you turn up the output without changing the frequency characteristic of incoming signals, you won’t be able to ignore the unnatural 'feeling' it creates. This discomfort is caused due to the difference between the frequency characteristic at the original output level and the actual output level. The Granith Grey Booster creates the necessary frequency characteristics while the signal passes through the circuit. By doing so, the Granith Grey Booster realizes a pure and high quality boost sound without compressing the sound or narrowing the dynamic range. The One Control Granith Grey Booster secured the 500kΩ input impedance to support any guitar and bass. You can use it by directly connecting any guitars and basses. The One Control Granith Grey Booster can be used with any guitar amp. It not only pushes tube amps but it is also suitable for boosting drive channels inside transistor amps. It can also be used just like other amps for analog circuits even when used with a number of digital amps. The Granith Grey Booster will maximize the potential of any amp to awaken its true capability.
Uses For A Clean Booster
- Gain Booster
- Use it to boost your gain before or after any effect. If you connect a spatial effect after the booster, the input is amplified and sometimes creates its own unique effect.
- Master Volume
- If you connect the booster at the end of your signal chain on your pedal board, you can adjust the volume while maintaining the signal created by other effects. You can adjust the booster according to your playing style or role, like switching between the backing and lead.
- Gain Control for a Tube Amp
- If you connect a clean booster before the tube amp input to adjust the volume boost setting, you can increase the strength of the natural distortion. On the other hand, if you distort the amp first and set the clean booster to lower the volume when it’s turned on, you can decrease the gain on the amp when it’s turned on.
- Volume Control for Tube Amps
- If you set a clean booster in the amp’s effect loop, you can adjust the output level of the signal sent to the power amp while preserving the preamp distortion. Set it to increase the volume and you will be able to give your signal a power amp distortion along with a higher volume. Set it to a lower volume and you can use it like an attenuator.
Specifications for the One Control Granith Grey Booster OC-GGBn
- Input impedance: 500K
- Output impedance: 2K
- Maximum gain:+ 15dB
- Drive voltage: 8.8V~9.6V
- Current consumption: 1mA
- S/N ratio: 115dB
- Total harmonic distortion rate: 0.006% (1 kHz)
- True-Bypass Switching
- High Quality Aluminum Enclosure
- Power: 9V Battery or Standard DC Power Supply
- Size: 47Wx100Dx48H mm (Including Knobs)
- Weight: Approx. 140 grams
Make'n Music is proud to be an authorized dealer, as well as the USA Shipping Warehouse for One Control products. Best Selection always in stock and for sale at a great price.
SKU: | 818996013498 |
Serial Number: | 818996013498 |
MPN: | 818996013498 |
One Control Granith Grey Booster OC-GGBn
Pure and High Quality Boost!!!
Electric Guitar Effects Pedal designed by Bjorn Juhl BJF / BJFe
A clean booster is simply a pedal that amplifies signals. The concept is simple, however due to the various uses for this type of pedal, it is a complicated feat. The Granith Grey Booster allows a high-quality boost of up to +15dB with minimized switching noise due to BJF engineered circuitry. This booster is able to attain the equivalent S/N ratio of a high-end amplifier. In order for this to happen, the circuitry was created to fit the frequency range of an electric guitar, which lowers some overtones that could otherwise be present with other boosters. The case is made of high quality cut-out aluminum to protect the precious sound signals from inside and outside noises. It is also much more durable than die cast cases.
The frequency characteristic of the Granith Grey Booster is unique. If you turn up the output without changing the frequency characteristic of incoming signals, you won’t be able to ignore the unnatural 'feeling' it creates. This discomfort is caused due to the difference between the frequency characteristic at the original output level and the actual output level. The Granith Grey Booster creates the necessary frequency characteristics while the signal passes through the circuit. By doing so, the Granith Grey Booster realizes a pure and high quality boost sound without compressing the sound or narrowing the dynamic range. The One Control Granith Grey Booster secured the 500kΩ input impedance to support any guitar and bass. You can use it by directly connecting any guitars and basses. The One Control Granith Grey Booster can be used with any guitar amp. It not only pushes tube amps but it is also suitable for boosting drive channels inside transistor amps. It can also be used just like other amps for analog circuits even when used with a number of digital amps. The Granith Grey Booster will maximize the potential of any amp to awaken its true capability.
Uses For A Clean Booster
- Gain Booster
- Use it to boost your gain before or after any effect. If you connect a spatial effect after the booster, the input is amplified and sometimes creates its own unique effect.
- Master Volume
- If you connect the booster at the end of your signal chain on your pedal board, you can adjust the volume while maintaining the signal created by other effects. You can adjust the booster according to your playing style or role, like switching between the backing and lead.
- Gain Control for a Tube Amp
- If you connect a clean booster before the tube amp input to adjust the volume boost setting, you can increase the strength of the natural distortion. On the other hand, if you distort the amp first and set the clean booster to lower the volume when it’s turned on, you can decrease the gain on the amp when it’s turned on.
- Volume Control for Tube Amps
- If you set a clean booster in the amp’s effect loop, you can adjust the output level of the signal sent to the power amp while preserving the preamp distortion. Set it to increase the volume and you will be able to give your signal a power amp distortion along with a higher volume. Set it to a lower volume and you can use it like an attenuator.
Specifications for the One Control Granith Grey Booster OC-GGBn
- Input impedance: 500K
- Output impedance: 2K
- Maximum gain:+ 15dB
- Drive voltage: 8.8V~9.6V
- Current consumption: 1mA
- S/N ratio: 115dB
- Total harmonic distortion rate: 0.006% (1 kHz)
- True-Bypass Switching
- High Quality Aluminum Enclosure
- Power: 9V Battery or Standard DC Power Supply
- Size: 47Wx100Dx48H mm (Including Knobs)
- Weight: Approx. 140 grams
Make'n Music is proud to be an authorized dealer, as well as the USA Shipping Warehouse for One Control products. Best Selection always in stock and for sale at a great price.
SKU: | 818996013498 |
Serial Number: | 818996013498 |
MPN: | 818996013498 |